Forgot your password?
Please enter your email & we will send your password to you:
My Account:
Copyright © International Chamber of Commerce (ICC). All rights reserved. ( Source of the document: ICC Digital Library )
The Guidance Notes for each of the 11 Incoterms® 2010 rules give a snapshot of the general characteristics of each rule, and may be useful to provide readers with a quick overview of the various categories of rules. The Guidance Notes, however, do not give the full picture, and relying on them alone is dangerous. It is therefore essential that readers consult the text of Incoterms® 2010, including the concise and useful Introduction, which is reproduced in full at Annex 4.
The 7 Incoterms® 2010 rules for use with any mode or modes of transport (‘multimodal’ rules) EXW
This rule may be used irrespective of the mode of transport selected and may also be used where more than one mode of transport is employed. It is suitable for domestic trade, while FCA is usually more appropriate for international trade.
‘Ex Works’ means that the seller delivers when it places the goods at the disposal of the buyer at the seller’s premises or at another named place (i.e., works, factory, warehouse, etc.). The seller does not need to load the goods on any collecting vehicle, nor does it need to clear the goods for export, where such clearance is applicable.
The parties are well advised to specify as clearly as possible the point within the named place of delivery, as the costs and risks to that point are for the account of the seller. The buyer bears all costs and risks involved in taking the goods from the agreed point, if any, at the named place of delivery.
EXW represents the minimum obligation for the seller. The rule should be used with care as:
[Page16:]
This rule may be used irrespective of the mode of transport selected and may also be used where more than one mode of transport is employed.
“Free Carrier” means that the seller delivers the goods to the carrier or another person nominated by the buyer at the seller’s premises or another named place. The parties are well advised to specify as clearly as possible the point within the named place of delivery, as the risk passes to the buyer at that point.
If the parties intend to deliver the goods at the seller’s premises, they should identify the address of those premises as the named place of delivery. If, on the other hand, the parties intend the goods to be delivered at another place, they must identify a different specific place of delivery.
FCA requires the seller to clear the goods for export, where applicable. However, the seller has no obligation to clear the goods for import, pay any import duty or carry out any import customs formalities.
“Carrier”: For the purposes of the Incoterms® 2010 rules, the carrier is the party with whom carriage is contracted.
[Page17:]
“Carriage Paid To” means that the seller delivers the goods to the carrier or another person nominated by the seller at an agreed place (if any such place is agreed between the parties) and that the seller must contract for and pay the costs of carriage necessary to bring the goods to the named place of destination.
When CPT, CIP, CFR or CIF are used, the seller fulfils its obligation to deliver when it hands the goods over to the carrier and not when the goods reach the place of destination.
This rule has two critical points, because risk passes and costs are transferred at different places. The parties are well advised to identify as precisely as possible in the contract both the place of delivery, where the risk passes to the buyer, and the named place of destination to which the seller must contract for the carriage. If several carriers are used for the carriage to the agreed destination and the parties do not agree on a specific point of delivery, the default position is that risk passes when the goods have been delivered to the first carrier at a point entirely of the seller’s choosing and over which the buyer has no control. Should the parties wish the risk to pass at a later stage (e.g., at an ocean port or airport), they need to specify this in their contract of sale.
The parties are also well advised to identify as precisely as possible the point within the agreed place of destination, as the costs to that point are for the account of the seller. The seller is advised to procure contracts of carriage that match this choice precisely. If the seller incurs costs under its contract of carriage related to unloading at the named place of destination, the seller is not entitled to recover such costs from the buyer unless otherwise agreed between the parties.
CPT requires the seller to clear the goods for export, where applicable. However, the seller has no obligation to clear the goods for import, pay any import duty or carry out any import customs formalities.
[Page18:]
“Carriage and Insurance Paid to” means that the seller delivers the goods to the carrier or another person nominated by the seller at an agreed place (if any such place is agreed between the parties) and that the seller must contract for and pay the costs of carriage necessary to bring the goods to the named place of destination.
The seller also contracts for insurance cover against the buyer’s risk of loss of or damage to the goods during the carriage. The buyer should note that under CIP the seller is required to obtain insurance only on minimum cover. Should the buyer wish to have more insurance protection, it will need either to agree as much expressly with the seller or to make its own extra insurance arrangements.
This rule has two critical points, because risk passes and costs are transferred at different places. The parties are well advised to identify as precisely as possible in the contract both the place of delivery, where the risk passes to the buyer, and the named place of destination to which the seller must contract for carriage. If several carriers are used for the carriage to the agreed destination and the parties do not agree on a specific point of delivery, the default position is that risk passes when the goods have been delivered to the first carrier at a point entirely of the seller’s choosing and over which the buyer has no control. Should the parties wish the risk to pass at a later stage (e.g., at an ocean port or an airport), they need to specify this in their contract of sale.
The parties are also well advised to identify as precisely as possible the point within the agreed place of destination, as the costs to that point are for the account of the seller. The seller is advised to procure contracts of carriage that match this choice precisely. If the seller[Page19:]incurs costs under its contract of carriage related to unloading at the named place of destination, the seller is not entitled to recover such costs from the buyer unless otherwise agreed between the parties. CIP requires the seller to clear the goods for export, where applicable. However, the seller has no obligation to clear the goods for import, pay any import duty or carry out any import customs formalities.
“Delivered at Terminal” means that the seller delivers when the goods, once unloaded from the arriving means of transport, are placed at the disposal of the buyer at a named terminal at the named port or place of destination. “Terminal” includes any place, whether covered or not, such as a quay, warehouse, container yard or road, rail or air cargo terminal. The seller bears all risks involved in bringing the goods to and unloading them at the terminal at the named port or place of destination.
The parties are well advised to specify as clearly as possible the terminal and, if possible, a specific point within the terminal at the agreed port or place of destination, as the risks to that point are for the account of the seller. The seller is advised to procure a contract of carriage that matches this choice precisely.
Moreover, if the parties intend the seller to bear the risks and costs involved in transporting and handling the goods from the terminal to another place, then the DAP or DDP rules should be used.
DAT requires the seller to clear the goods for export, where applicable. However, the seller has no obligation to clear the goods for import, pay any import duty or carry out any import customs formalities.
[Page20:]
“Delivered at Place” means that the seller delivers when the goods are placed at the disposal of the buyer on the arriving means of transport ready for unloading at the named place of destination. The seller bears all risks involved in bringing the goods to the named place.
The parties are well advised to specify as clearly as possible the point within the agreed place of destination, as the risks to that point are for the account of the seller. The seller is advised to procure contracts of carriage that match this choice precisely. If the seller incurs costs under its contract of carriage related to unloading at the place of destination, the seller is not entitled to recover such costs from the buyer unless otherwise agreed between the parties.
DAP requires the seller to clear the goods for export, where applicable. However, the seller has no obligation to clear the goods for import, pay any import duty or carry out any import customs formalities. If the parties wish the seller to clear the goods for import, pay any import duty and carry out any import customs formalities, the DDP term should be used.
“Delivered Duty Paid” means that the seller delivers the goods when the goods are placed at the disposal of the buyer, cleared for import on the arriving means of transport ready for unloading at the named place of destination. The seller bears all the costs and risks involved in bringing the goods to the place of destination and has an obligation to clear the goods not only for export but also for import, to pay any duty for both export and import and to carry out all customs formalities.
DDP represents the maximum obligation for the seller.
[Page21:]
The parties are well advised to specify as clearly as possible the point within the agreed place of destination, as the costs and risks to that point are for the account of the seller. The seller is advised to procure contracts of carriage that match this choice precisely. If the seller incurs costs under its contract of carriage related to unloading at the place of destination, the seller is not entitled to recover such costs from the buyer unless otherwise agreed between the parties.
The parties are well advised not to use DDP if the seller is unable directly or indirectly to obtain import clearance.
If the parties wish the buyer to bear all risks and costs of import clearance, the DAP rule should be used.
Any VAT or other taxes payable upon import are for the seller’s account unless expressly agreed otherwise in the sales contract.
The 4 Incoterms® 2010 rules for use with sea or inland waterway transport (‘maritime’ rules)
This rule is to be used only for sea or inland waterway transport.
“Free Alongside Ship” means that the seller delivers when the goods are placed alongside the vessel (e.g., on a quay or a barge) nominated by the buyer at the named port of shipment. The risk of loss of or damage to the goods passes when the goods are alongside the ship, and the buyer bears all costs from that moment onwards.
The parties are well advised to specify as clearly as possible the loading point at the named port of shipment, as the costs and risks to that point are for the account of the seller and these costs and associated handling charges may vary according to the practice of the port.
The seller is required either to deliver the goods alongside the ship or to procure goods already so delivered for shipment. The reference to “procure” here caters for multiple sales down a chain (‘string sales’), particularly common in the commodity trades.
[Page22:]
Where the goods are in containers, it is typical for the seller to hand the goods over to the carrier at a terminal and not alongside the vessel. In such situations, the FAS rule would be inappropriate, and the FCA rule should be used.
FAS requires the seller to clear the goods for export, where applicable. However, the seller has no obligation to clear the goods for import, pay any import duty or carry out any import customs formalities.
“Free on Board” means that the seller delivers the goods on board the vessel nominated by the buyer at the named port of shipment or procures the goods already so delivered. The risk of loss of or damage to the goods passes when the goods are on board the vessel, and the buyer bears all costs from that moment onwards.
The seller is required either to deliver the goods on board the vessel or to procure goods already so delivered for shipment. The reference to “procure” here caters for multiple sales down a chain (‘string sales’), particularly common in the commodity trades.
FOB may not be appropriate where goods are handed over to the carrier before they are on board the vessel, for example goods in containers, which are typically delivered at a terminal. In such situations, the FCA rule should be used.
FOB requires the seller to clear the goods for export, where applicable. However, the seller has no obligation to clear the goods for import, pay any import duty or carry out any import customs formalities.
[Page23:]
“Cost and Freight” means that the seller delivers the goods on board the vessel or procures the goods already so delivered. The risk of loss of or damage to the goods passes when the goods are on board the vessel. The seller must contract for and pay the costs and freight necessary to bring the goods to the named port of destination.
When CPT, CIP, CFR or CIF are used, the seller fulfils its obligation to deliver when it hands the goods over to the carrier in the manner specified in the chosen rule and not when the goods reach the place of destination.
This rule has two critical points, because risk passes and costs are transferred at different places. While the contract will always specify a destination port, it might not specify the port of shipment, which is where risk passes to the buyer. If the shipment port is of particular interest to the buyer, the parties are well advised to identify it as precisely as possible in the contract.
The parties are well advised to identify as precisely as possible the point at the agreed port of destination, as the costs to that point are for the account of the seller. The seller is advised to procure contracts of carriage that match this choice precisely. If the seller incurs costs under its contract of carriage related to unloading at the specified point at the port of destination, the seller is not entitled to recover such costs from the buyer unless otherwise agreed between the parties.
The seller is required either to deliver the goods on board the vessel or to procure goods already so delivered for shipment to the destination. In addition, the seller is required either to make a contract of carriage or to procure such a contract. The reference to “procure” here caters for multiple sales down a chain (‘string sales’), particularly common in the commodity trades.
CFR may not be appropriate where goods are handed over to the carrier before they are on board the vessel, for example goods in containers, which are typically delivered at a terminal. In such circumstances, the CPT rule should be used.
[Page24:]
CFR requires the seller to clear the goods for export, where applicable. However, the seller has no obligation to clear the goods for import, pay any import duty, or carry out any import customs formalities.
“Cost, Insurance and Freight” means that the seller delivers the goods on board the vessel or procures the goods already so delivered. The risk of loss of or damage to the goods passes when the goods are on board the vessel. The seller must contract for and pay the costs and freight necessary to bring the goods to the named port of destination.
The seller also contracts for insurance cover against the buyer’s risk of loss of or damage to the goods during the carriage. The buyer should note that under CIF the seller is required to obtain insurance only on minimum cover. Should the buyer wish to have more insurance protection, it will need either to agree as much expressly with the seller or to make its own extra insurance arrangements.
When CPT, CIP, CFR, or CIF are used, the seller fulfils its obligation to deliver when it hands the goods over to the carrier in the manner specified in the chosen rule and not when the goods reach the place of destination.
The parties are well advised to identify as precisely as possible the point at the agreed port of destination, as the costs to that point are for the account of the seller. The seller is advised to procure contracts of carriage that match this choice precisely. If the seller incurs costs under its contract of carriage related to unloading at the specified point at the port of destination, the seller is not[Page25:]entitled to recover such costs from the buyer unless otherwise agreed between the parties.
The seller is required either to deliver the goods on board the vessel or to procure goods already so delivered for shipment to the destination. In addition the seller is required either to make a contract of carriage or to procure such a contract. The reference to “procure” here caters for multiple sales down a chain (‘string sales’), particularly common in the commodity trades.
CIF may not be appropriate where goods are handed over to the carrier before they are on board the vessel, for example goods in containers, which are typically delivered at a terminal. In such circumstances, the CIP rule should be used.
CIF requires the seller to clear the goods for export, where applicable. However, the seller has no obligation to clear the goods for import, pay any import duty or carry out any import customs formalities.
[Page26:]
Specimen form of ICC Model International Sale Contract
[Page27:]
[Page28:]
[Page29:]
[Page30:]
[Page31:]
[Page32:]
[Page33:]
[Page34:]
6 The commodity code or customs code is the 6-digit code of the product under the Harmonised System of the World Customs Organisation (http://www.wcoomd.org/home_hsoverviewboxes.htm) or any more specific (extended) code under national customs legislation. In the latter situations it might be wise to indicate the nature of the code (TARIC, MERCOSUR, TVNED, etc.)
7 UNECE ECE/Trade/203 Recommendation n°9 – Alphabetic Code for the Representation for Currencies; available at http://www.unece.org/cefact/recommendations/rec_index.html.
8 Strikes, Riots and Civil Commotion
9 http://www.ecbs.org/iban.htm
10 https://www2.swift.com/directories/